Inoxpres press fittings are manufactured from high-alloyed austenitic stainless Cr-Ni-Mo steel n 1.4404 (AISI 316 L). The fittings are marked with laser recording the manufacturers name, diameter, DVG ...

Fire suppression systems from Prevent Systems are based on low pressure water mist technology. Low pressure water mist offers a large number of advantages both to specialists and users. Advantages whi ...

Spears FlameGuard® CPVC fire sprinkler systems offer all of the protection and reliability of traditional piping systems whilst offering some unique advantages to the contractor. The ease of installat ...

The Fireray® 3000 Exd comprises of a Transmitter Unit, which projects a modulated infra-red light beam to a Receiver Unit. The received signal is analysed and should smoke be present for a predetermined time a fire condition is signalled. A Control Unit is located within 100 metres cable run of the Receiver Unit enabling low level installation and diagnostic capability. Conforms to BS 5839 Part 5.

The TalentumTT2 is a test and calibration unit explicitly designed to work with the full range of Talentum® flame detectors.

Using the intuitive menu, choose the type of flame detector to be tested; squeeze the trigger, and the unit will automatically perform a test from a distance of up to 6 metres, which means that in many applications, the Talentum® flame detector can be tested from ground level.

The Talentum® Spark is a specialist detector designed for industrial applications to protect enclosed, dark areas where visible light is not present.

This detector has a high sensitivity to flame, sparks, and embers and has a very fast response time. The detector has one infra-red (IR) sensor, which is selective to low frequency modulated infra-red (IR) radiation such as that emitted from flames and sparks.

These flame detectors give the highest immunity to false flame sources both indoors or out. They have internal self-test sources that check the detector’s operation when remotely instructed. The maximum ambient temperature is normally 55°C or 85°C for the higher temperature specification detectors.

These flame detectors give high immunity to false flame sources. They have internal self-test sources that check the detector’s operation when remotely instructed.

 

The Fireray® 5000 motorised reflective, auto aligning infrared optical beam smoke detector can be installed with up to two detector heads per system, thus saving on installation time and costs. In addition, each system controller houses two pairs of fire and fault relays, one per detector. This innovative system has been designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future.

The Fireray® 3000 End-to-End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties.