Ezgil Guvenlik Teknolojileri Ltd. Sti.

Stand: 4/D35
Extinguishers Fire Detection Fire Prevention
NEXT-GENERATION FIRE DETECTION & SUPPRESSION SOLUTIONS

Ezgil develops integrated fire safety systems built on two fundamental layers. The first layer is the TAG Series: autonomous and semi-autonomous detection-triggering units manufactured entirely in-house. These devices sense ambient temperature and generate their own triggering signal without external power, embodying the principle of "Energy Independence" in fire safety. The second layer consists of next-generation suppression technologies. Ezgil integrates its in-house manufactured IPR™ (Impulse Powder Reactor) suppression units together with aerosol suppression generators, which it distributes. Both technologies suppress fire through chemical inhibition, use eco-friendly agents, and require minimal intervention throughout their operational life.

With the integrated architecture of TAG Series solutions, fires are detected early and suppression is activated immediately. Since 2017, our innovative solutions have delivered long-lasting protection that significantly reduces maintenance frequency and operational costs across the entire lifecycle, from site survey to commissioning. We minimize the cost and time burden of traditional systems, including mandatory annual inspections, periodic agent replacement, and cylinder recharging. This approach delivers sustainable and cost-effective fire safety for 10 to 15 years.

Address

Güzelyalı, Erdil Sk. No:28/1
Pendik / ISTANBUL
34903
Türkiye

Products

IPR E.01 FIRE EXTIGUISHER
The IPR-E01 is specifically designed for the engine and hydraulic compartments of heavy machinery such as excavators and harbor cranes, where fire risk is high. Such environments are generally unsuita …
IPR E.02 FIRE EXTIGUISHER
IPR E.02 System DescriptionThis model is specifically engineered for targeted fire suppression in high-ceiling and large-scale industrial facilities to protect specific high-risk zones. It is the idea …
IPR E.03 FIRE EXTIGUISHER
Forklift battery charging areas are classified as hazardous zones and are typically located in open areas, under canopies, or in enclosed spaces within facilities. The ability of IPR technology to eff …
IPR E.04 FIRE EXTIGUISHER
Specially designed for transformer rooms, MV (Medium Voltage) switchgear rooms, hydraulic rooms, and chemical storage areas. It allows for installation at heights of up to 6 meters. The IPR E.04 is av …
IPR E.05 FIRE EXTIGUISHER
The IPR-E05 is specifically designed for transformer rooms, medium-voltage switchgear rooms, hydraulic rooms, and chemical storage areas. It provides reliable fire suppression in high-risk environment …
MicroFireX - The Tiny Fire Extinguisher of the Future, with Nano Technology
About MicroFireXThe nano-tech MicroFireX stops fire at its source — protecting you and your loved ones. Tiny in size, yet delivers full automatic protection up to 0.3 m³.MicroFireX (MFX) is a small ye …
FIRE-TAG® THERMAL DETECTION & AUTONOMOUS TRIGGERING DEVICE
Fire-Tag® produces the electrical current required for the extinguisher to operate when the ambient temperature rises to the target temperature. IT DOES NOT REQUIRE ANY MAINTENANCE
RACK-EX®  FOR DATA CENTER RACK CABINETS THERMAL DETECTION & EXTINGUISHING SYSTEM
Rack-Ex® is 2U high. It is manufactured in dimensions that can be easily placed in a shelf as a natural part of the rack cabinet. Rack-Ex® does not require an external electrical connection. IT DOES N …
CORDY-TAG® THERMAL DETECTION & TRIGGERING DEVICE
Cordy-Tag® cross-checks the fire alarm signal coming via two different sensors (LHD cable and/or dry contact). If a contact signal comes to both inputs at the same time, it sends 3VDC to both outputs. …
THERMO-TAG®  THERMAL DETECTION & TRIGGERING DEVICE FOR THE FIRE EXTINGUISHERS
Thermo-Tag®, sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected. It can produce NO-NC output with the relay on it. The thermostat degree of the sensors on it can be selected …
TRIGGER-TAG® PROGRAMMABLE MULTI/SEQUENCE TRIGGER DEVICE FOR THE FIRE EXTINGUISHERS
Trigger-Tag®, has been designed that can send sequentially trigger signals in the form of one alarm input and 4+1 outputs. 7 Trigger-Tag® cards can be connected in series and can be trigger 28 pcs fir …
11 Results

    Videos

    Fire-Tag' Heat Detection & Activation Device Tests
    Fire-Tag® produces the electrical current required for the extinguisher to operate when the ambient temperature rises to the target temperature. it has higher performance than equivalent products.
    Thermo-Tag' Thermal Detection & Triggering Device
    Thermo-Tag®, sends a trigger voltage of 3VDC to a fire extinguisher when heat is detected. It can produce NO-NC output with the relay on it. Thermo-Tag® does not require an external electrical source.
    Rack-Ex' Heat Detection & Fire Suppression System
    Quickly extinguishes fire inside the rack cabinet. Rack-Ex® can easily placed on a shelf inside like a part of it manufactured in sizes to fit. It does not require an external electrical connection. 
    9 Results
      Loading

      Contact Exhibitor